Home  /  News

The Latest Technology In Die Casting Molds

Jun. 17, 2019

Here is Vacuum Casting Mold Manufacturer talking about The Latest Technology In Die Casting Molds. 

If you have any idea about Vacuum Casting Silicone Rubber, welcome to contact us and discuss.

The latest technology in die casting molds:

Various new technologies for surface treatment of die-casting molds are emerging, but in general, they can be divided into the following three categories:

First, the improved technology of the traditional heat treatment process;

Second, the surface modification technology, including surface thermal diffusion treatment, surface phase transformation strengthening, EDM strengthening technology, etc.;

Third, coating technology, including electroless plating.

Vacuum Casting Mold Manufacturer

Die casting molds are a large class in the mold. With the rapid development of China's automobile and motorcycle industry, the die-casting industry has ushered in a new era of development. At the same time, it also puts forward higher requirements on the comprehensive mechanical properties and life of die-casting molds. Luo Baihui, secretary-general of the International Model Association, believes that it is still difficult to meet the ever-increasing use performance requirements by relying only on new mold materials. Various surface treatment techniques must be applied to the surface treatment of die-casting molds to achieve high efficiency in die-casting molds. High precision and long life requirements. In various molds, the working conditions of the die-casting mold are more demanding. Pressure casting is to make the molten metal fill the mold cavity under high pressure and high speed and die-casting. It is repeatedly in contact with the hot metal during the working process. Therefore, the die-casting mold is required to have high heat fatigue resistance, thermal conductivity wears resistance and corrosion resistance. , impact toughness, red hardness, good release properties, etc. Therefore, the surface treatment technology of the die-casting mold is highly demanded.


Share: